Housing Fitted with Zero Force Buttons (240001)
IDEM’s TouchSafe Two-Hand Control panels are designed to provide reliable protection by ensuring the machine operators hands are located on the control station when the signal for machine operation is issued.
- Robust Die-Cast Housing
- Facility to fit 22mm auxiliary Emergency Stop buttons or diagnostic lamps
- Fitted with Two Zero-Force Buttons (Ergonomic Design)
- Various Wiring Entry Points
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part Number | Description |
|---|---|
| 240001 | Two-hand control station (Die-Cast painted yellow) fitted with 2 x ZF buttons |
| Technical Data | |
|---|---|
| Approvals | cULus |
| Housing Material | Yellow Painted Die-Cast Aluminum |
| Enclosure Protection | IP65 (ensure all entry seals are tightened at least 1Nm (9 inch/lbs)) |
| Conduit Entries | 2 x M20 2 x M25 2 x ½ ”NPT 2 x ¾” NPT |
| Technical Data for ZF Button | |
|---|---|
| Insulating housing | Polyester |
| Operating Temperature | -20 ... +40 °C |
| Operating Voltage | 24V.dc (+/- 10%) |
| Power Supply | Use SELV / PELV Power Supply |
| Output Circuits | Rated 24V.dc 0.1A |
| Operating Force | Zero |
| LED | Green – activated Red – waiting |
| Information with regard to UL Standards |
|---|
| Type 1 enclosure. Maximum temperature 40°C. Use Class 2 Supply. 24V.dc only. Output Circuits: Rated 24V.dc 0.1A. For use in NFPA 79 Applications only (or equivalent). |
