Housing Fitted with Mechanical Buttons (240002)
IDEM’s TouchSafe Two-Hand Control panels are designed to provide reliable protection by ensuring the machine operators hands are located on the control station when the signal for machine operation is issued.
- Robust Die-Cast Housing
- Facility to fit 22mm auxiliary Emergency Stop buttons or diagnostic lamps
- Fitted with Two Momentary Buttons
- Various Wiring Entry Points
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part Number | Description |
|---|---|
| 240002 | Two-hand control station (Die-Cast painted yellow) fitted with 2 x MF buttons |
| Technical Data | |
|---|---|
| Approvals | cULus |
| Housing Material | Yellow Painted Die-Cast Aluminum |
| Enclosure Protection | IP65 (ensure all entry seals are tightened at least 1Nm (9 inch/lbs)) |
| Conduit Entries | 2 x M20 2 x M25 2 x ½ ”NPT 2 x ¾” NPT |
| Technical Data for MF Button | |
|---|---|
| Insulating housing | Polyester |
| Operating Temperature | -20 ... +40 °C |
| Mechanical Life (B10d) | 1,000,000 cycles |
| Output Contacts | Rated 240V. 3A. (A300) |
| Operating Force | 20N |
| Enclosure Protection | IP65 capability when fitted to 2 Hand Control Housing |
| Information with regard to UL Standards |
|---|
| Type 1 enclosure. Maximum temperature 40°C. Intended for same polarity use. A300 Pilot Duty. 240V. 3A. PF 0.38 or greater, tested for 6,000 cycle’s endurance. Use 16-28AWG stranded copper conductors (rated 90°C). Terminal tightening torque 7lbs ins (0.8Nm). Intended for same polarity use. For Use on a Flat Surface of a Type 1 Enclosure or equivalent. |
