Panel Mount Trapped Key Control Isolation Switch with Solenoid Controlled Key Release (M-CS-SKR)

The M-CS-SKR is used for isolating an electrical control circuit. The key is solenoid controlled and requires an unlock signal before the key can be turned to the OFF position, allowing it to be removed and transferred to the next stage in the Trapped Key System. The M-CS-SKR-R works in the opposite way to the M-CS-SKR and does not have a key present during normal operation.

Robust Die-Cast Barrel with Stainless-Steel Mounting Plate
4NC + 2NO Monitoring Contact Block
Installation via Panel Mounting Plate

Part Number	Part Description
M-CS-SKR	Panel Mount Control Circuit Switch with Solenoid Key Release
M-CS-SKR-R	Panel Mount Control Circuit Switch with Solenoid Key Release – Reverse Key Function

Note
Key sold separately

Technical Data
Approvals	cULus
Enclosure Material	Die-Cast Metal with Polyester Cover
Safety Contacts	Utilization Category AC15 A300 3A. Thermal Current (Ith) 5A
Overload protection fuse (fuse externally)	10A. (FF)
Auxiliary Contact	24V.ac/dc 0.5A. maximum
Rated Insulation Voltage	600VAC
Rated Impulse Withstand Volt	2500VAC
Solenoid Voltage	24V ac/dc (+/- 10%)
Operating Temperature	-20 ... +40 °C
Mechanical Life (B10d)	1,000,000 cycles

Information with regard to UL Standards
Type 1 enclosure. Maximum temperature 40°C. Use 16-28AWG stranded copper conductors (rated 90°C). Terminal Torque 6 lb ins. (0.7Nm). Intended for same polarity use. A300 Pilot Duty. 240V. 3A. PF 0.38 or greater, tested for 6,000 cycles endurance.