Panel Mount Trapped Key Control Isolation Switch (M-CS)
The M-CS is used for isolating an electrical control circuit. Turning the key to the OFF position opens the safety contacts, allowing the key to be removed and transferred to the next stage in the Trapped Key System. The M-CS-R works in the opposite way to the M-CS, and does not have a key present during normal operation.
- Enclosed in Die-Cast Metal Barrel and Stainless Steel Mounting Plate
- 4NC + 2NO Monitoring Contact Block
- Installation via Panel Mounting Plate
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part Number | Part Description |
|---|---|
| M-CS | Panel Mount Control Circuit Switch |
| M-CS-R | Panel Mount Control Circuit Switch Reverse Key Function |
| Note |
|---|
| Key sold separately |
| Technical Data | |
|---|---|
| Approvals | cULus |
| Enclosure Material | Die-Cast Barrel / Polyester Enclosure |
| Safety Contacts | Utilization Category AC15 A300 3A. Thermal Current (Ith) 5A |
| Overload protection fuse (fuse externally) | 10A. (FF) |
| Auxiliary Contact | 24V.ac/dc 0.5A. maximum |
| Rated Insulation Voltage | 600VAC |
| Rated Impulse Withstand Volt | 2500VAC |
| Operating Temperature | -20 ... +40 °C |
| Mechanical Life (B10d) | 1,000,000 cycles |
| Information with regard to UL Standards |
|---|
| Type 1 enclosure. Maximum temperature 40°C. Use 16-28AWG stranded copper conductors (rated 90°C). Terminal Torque 6 lb ins. (0.7Nm). Intended for same polarity use. A300 Pilot Duty. 240V. 3A. PF 0.38 or greater, tested for 6,000 cycles endurance |
