Compact Tongue Interlock Safety Switch (INCH-3)
The compact body is only 25mm wide with 18mm fixing centres, ideal for restricted spaces. The rotatable head provides up to 8 actuator entry positions. In addition to the INCH-1, the INCH-3 has three M16 conduit entries and 3-Pole contact blocks.
- Housing/Fixing: Compact, 18mm fixing profile
- Contacts: 2 N/C + 1 N/O
- Connection: Wired or M12 Quick Connect
NOTE: Replaceable contact blocks.
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part No. | Part Description |
|---|---|
| 223001 | INCH-3 M16 2NC 1NO |
| 223001A | INCH-3 M16 2NC 1NO – std actuator |
| 223001F | INCH-3 M16 2NC 1NO – flat actuator |
| 223001PF | INCH-3 M16 2NC 1NO – PF actuator |
| 223002 | INCH-3 QC M12 8way 2NC 1NO |
| 223002A | INCH-3 QC M12 8way 2NC 1NO – std actuator |
| 223002F | INCH-3 QC M12 8way 2NC 1NO – flat actuator |
| 223002PF | INCH-3 QC M12 8way 2NC 1NO – PF actuator |
| Technical Data | |
|---|---|
| Certificates | cULus |
| Technology | Tongue Interlock (Non Locking) |
| Housing Material | Polyester |
| Head Material | Stainless Steel |
| Contact Configuration | 2 NC + 1 NO |
| Thermal Current (lth) | 10A |
| Overload protection fuse (fuse externally) | 10A. (FF) |
| Rated Insulation/Withstand Voltages | 600VAC/2500VAC |
| Actuator Travel/Force for Positive Opening | 6mm/12N |
| Actuator Entry Minimum Radius | 150mm Standard 100mm Flexible |
| Maximum Approach Withdrawal Speed | 600mm/s |
| Enclosure Protection | IP67 |
| Operating Temperature | -25 ... +80 °C |
| Vibration | IEC 68-2-6 10-55Hz+1Hz Excursion: 0.35mm, 1 octave/min |
| Fixing | 2 x M4 |
| Pollution Degree | 3 |
| Short Circuit Overload Protection | Fuse externally 10A (FF) |
| Information with regard to UL Standards | |
|---|---|
| Enclosure | Type 1 |
| Electrical Rating | Pilot Duty A300 240V.ac 3A. 6,000 cycles |
| Maximum Ambient Temperature | +40 °C |
| Use 16 - 12AWG stranded copper insulated conductors rated 90ºC minimum. (75C. ampacity). | |
| Terminal tightening torque 7ibs ins (0.8Nm) | |
| Intended for same polarity use and one polymeric conduit connection | |
| Not suitable for connection to a rigid metal conduit system |
