GLHL-Z safety rope pull switch ossd outputs

Z-Range Heavy Duty Safety Rope Pull Switches (GLHL-Z)

The GLHL-Z heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHL-Z can be used on its own or in combination with the GLHD-Z to connect up to 125m rope span from the left side.

Body Material: Die-Cast Metal; Painted Yellow
Ingress Protection: IP67
Contacts: 2 OSSD + 1 Auxiliary Output
Cable Length (1 Switch): 100m
Cable Length (2 Switches): 125m

Part Number	Part Description	Contact Configuration	Connection
141301-Z	GLHL-Z Z-Range 2 OSSD 1 Auxiliary M12-QC	2 OSSD PNP + 1 PNP AUX.	250mm Pigtail M12-QC 8-PIN

Technical Data
Approvals	TUV (on CBZ internal contact block), cULus
Technology	Safety Rope Pull Switch
Housing Material	Painted Die-Cast Metal
Operating Temperature	-20 ... +50 °C
Enclosure Protection	IP67
Rope Spans	Up to 125m
Rope Type	4.0mm Outside Dia. Steel inner-PVC sheath
Mounting	4 x M5
Torque settings	Mounting M5 4.0 Nm Lid T20 Torx M4 1.5 Nm Terminals 1.0 Nm
Tension Force (typical mid setting)	130N
Typical Operating Force (Rope pulled)	< 125N. < 300mm Deflection
Contact Configuration	2 x OSSD PNP + 1 x PNP Auxiliary
Rated Operating Voltage	24V DC -15% +10% (Use SELV/PELV)
Power Consumption	0.7W
Outputs Rated Voltage	24V DC
Outputs max. / min.Current	0.2 A / 1mA
Inputs Rated Voltage / Current	24V DC / 2mA
Auxiliary Signalling Output Rated Voltage	24V DC
Auxiliary Signalling Output Max. Current	0.2 A PNP
Response Time Guard Open	60ms max.
Response Time Inputs Off	20ms max.