Z-Range Heavy Duty Safety Rope Pull Switches with Dual Head (GLHD-SS-Z)

The GLHD-SS-Z heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.

Body Material: Stainless Steel 316
Ingress Protection: IP69K (IP67 at the connector)
Contacts: 2 OSSD + 1 Auxiliary Output
Cable Length (1 Switch): 100m left / 100m right
Cable Length (3 Switches): 125m left / 125m right

Part Number	Part Description	Contact Configuration	Connection
145300-Z	GLHD-SS-Z Z-Range 2 OSSD 1 Auxiliary M12-QC	2 OSSD PNP + 1 PNP AUX.	250mm Pigtail M12-QC 8-PIN

Technical Data
Approvals	TUV (on CBZ internal contact block), cULus
Technology	Safety Rope Pull Switch
Housing Material	316 Grade Stainless Steel
Operating Temperature	-20 ... +50 °C
Enclosure Protection	IP67, IP69K (The M12 Quick Connect is rated to IP67)
Rope Spans	Up to 250m
Rope Type	4.0mm Outside Dia. Steel inner-PVC sheath
Mounting	4 x M5
Torque settings	Mounting M5 4.0 Nm Lid T20 Torx M4 1.5 Nm Terminals 1.0 Nm
Tension Force (typical mid setting)	130N
Typical Operating Force (Rope pulled)	< 125N. < 300mm Deflection
Contact Configuration	2 x OSSD PNP + 1 x PNP Auxiliary
Rated Operating Voltage	24V DC -15% +10% (Use SELV/PELV)
Power Consumption	0.7W
Outputs Rated Voltage	24V DC
Outputs max. / min.Current	0.2 A / 1mA
Inputs Rated Voltage / Current	24V DC / 2mA
Auxiliary Signalling Output Rated Voltage	24V DC
Auxiliary Signalling Output Max. Current	0.2 A PNP
Response Time Guard Open	60ms max.
Response Time Inputs Off	20ms max.