Stainless Steel Safety Limit Switch with Pin Plunger (HLM-SS-PP)

The pin plunger limit switches from IDEM Safety are designed to be mounted for position sensing of moving applications e.g., guard doors, conveyors, machine beds, elevators etc. The internal contact block is positively operated to comply with IEC 60947-5-1.

Material: 316 Stainless Steel with Mirror Polished Lid
Actuation: Pin Plunger
Ingress Protection: IP69K

Part Number	Part Description
175101	HLM-SS Pin Plunger M20 2NC 2NO
175102	HLM-SS Pin Plunger ½NPT 2NC 2NO
175102-GC	HLM-SS Pin Plunger ½NPT 2NC 2NO – Gold Contacts
175103	HLM-SS Pin Plunger QC-M23 2NC 2NO
175104	HLM-SS Pin Plunger M20 3NC 1NO
175105	HLM-SS Pin Plunger ½NPT 3NC 1NO
175106	HLM-SS Pin Plunger QC-M23 3NC 1NO
175107	HLM-SS Pin Plunger M20 4NC
175108	HLM-SS Pin Plunger ½NPT 4NC
175109	HLM-SS Pin Plunger QC-M23 4NC
175110	HLM-SS Pin Plunger M20 1NC 1NO snap
175111	HLM-SS Pin Plunger ½NPT 1NC 1NO snap
175111-GC	HLM-SS Pin Plunger ½NPT 1NC 1NO snap c/w gold contacts
175112	HLM-SS Pin Plunger QC-M23 1NC 1NO snap

Note
Gold plated contacts are available for circuits with low power (5V 5mA).

Technical Data
Approvals	cULus
Material	316 Grade Stainless Steel
Enclosure Protection	IP67, IP69K (NEMA 6)
Operating Temperature	-25 ... +80 °C
Positive Opening Operation (NC Contacts)	18N
Utilization Category	AC15 A300 240V. 3A
Min Current	5V, 5mA, DC
Thermal Current (Ith)	10A
Rated Impulse Withstand Volt	2500VAC
Mechanical Life Expectancy	2,500,000 Cycles
Vibration	IEC 68-2-6, 10-55Hz 0.35mm
Conductor size	1.5 sq.mm

Information with regard to UL standards
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.