Safety Limit Switch with Roller Plunger - Die Cast

Safety Limit Switch in Die Cast with Roller Plunger (HLM-RP)

The roller plunger limit switches from IDEM Safety are designed to be mounted for position sensing of moving applications e.g., guard doors, conveyors, machine beds, elevators etc. The internal contact block is positively operated to comply with IEC 60947-5-1.

Material: Painted Die-Cast Body / Stainless Steel Roller
Actuation: Roller Plunger
Ingress Protection: IP67

Part Number	Description
174051	HLM Roller Plunger M20 2NC 2NO
174051-GC	HLM Roller Plunger M20 2NC 2NO c/w Gold contacts
174052	HLM Roller Plunger ½NPT 2NC 2NO
174053	HLM Roller Plunger QC-M23 2NC 2NO
174054	HLM Roller Plunger M20 3NC 1NO
174055	HLM Roller Plunger ½NPT 3NC 1NO
174056	HLM Roller Plunger QC-M23 3NC 1NO
174057	HLM Roller Plunger M20 4NC
174058	HLM Roller Plunger ½NPT 4NC
174059	HLM Roller Plunger QC-M23 4NC
174060	HLM Roller Plunger M20 1NC 1NO Snap
174061	HLM Roller Plunger ½NPT 1NC 1NO Snap
174062	HLM Roller Plunger QC-M23 1NC 1NO Snap

Note
Gold plated contacts are available for circuits with low power (5V 5mA).

Technical Data
Approvals	cULus
Material	Painted Die-Cast Aluminum
Roller Material	316 Grade Stainless Steel
Enclosure Protection	IP67
Operating Temperature	-25 ... +80 °C
Positive Opening Operation (NC Contacts)	18N
Utilization Category	AC15 A300 240V. 3A
Min Current	5V, 5mA, DC
Thermal Current (Ith)	10A
Rated Impulse Withstand Volt	2500VAC
Mechanical Life Expectancy	2,500,000 Cycles
Vibration	IEC 68-2-6, 10-55Hz 0.35mm
Conductor size	1.5 sq.mm

Information with regard to UL standards
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.