Safety Limit Switch with Lever Arm - Die Cast

Safety Limit Switch in Die Cast with Lever Arm (HLM-AL)

The lever arm limit switches from IDEM Safety are designed to be mounted for position sensing of moving applications e.g., guard doors, conveyors, machine beds, elevators etc. The internal contact block is positively operated to comply with IEC 60947-5-1.

Material: Painted Die-Cast Body / Stainless Steel Head
Actuation: Lever Arm
Ingress Protection: IP67

Part Number	Part Description
174251	HLM Lever Arm M20 2NC 2NO
174252	HLM Lever Arm ½NPT 2NC 2NO
174253	HLM Lever Arm QC-M23 2NC 2NO
174254	HLM Lever Arm M20 3NC 1NO
174255	HLM Lever Arm ½NPT 3NC 1NO
174256	HLM Lever Arm QC-M23 3NC 1NO
174257	HLM Lever Arm M20 4NC
174258	HLM Lever Arm ½NPT 4NC
174259	HLM Lever Arm QC-M23 4NC
174260	HLM Lever Arm M20 1NC 1NO Snap
174261	HLM Lever Arm ½NPT 1NC 1NO Snap
174262	HLM Lever Arm QC-M23 1NC 1NO Snap

Note
Gold plated contacts are available for circuits with low power (5V 5mA).

Technical Data
Approvals	cULus
Housing Material	Painted Die-Cast Aluminum
Lever Material	316 Grade Stainless Steel
Enclosure Protection	IP67
Operating Temperature	-25 ... +80 °C
Typical operating parameters	0.4Nm Torque 15-30 degrees contact changeover
Vibration	IEC 68-2-6, 10-55Hz 0.35mm
Conductor size	1.5 sq.mm
Fixing	M5 Bolts
Positive Opening Operation	NC Contacts
Utilization Category	AC15 A300 240V. 3A
Min Current	5V, 5mA, DC
Thermal Current (Ith)	10A
Rated Impulse Withstand Volt	2500VAC

Information with regard to UL Standards
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.