KL1-P Guard Locking Safety Switch

The KL1-P (LEILOCK) guard locking safety interlock features a compact plastic body and a holding force of up to 1400N to keep small to medium guard doors closed until hazards have been removed.

Body manufactured from High Specification Polyester – Red
Head manufactured from 316 Stainless Steel
Holding Force up to F1Max 1400N (140Kg)
Actuation via Rotating head for 4 entry positions
Ingress Protection up to IP67
Conduit: 1 x M20 or ½” NPT (Quick Connect Available)

Part Number	Part Description	Voltage	Conduit Type	Actuator
221001	KL1-P M20 24v LED only	24v	M20	None
221001A	KL1-P M20 24v LED only – std actuator	24v	M20	Standard
221001F	KL1-P M20 24v LED only – flat actuator	24v	M20	Flat
221001HF	KL1-P M20 24v LED only – HF actuator	24v	M20	HF
221001HFH	KL1-P M20 24v LED only – HFH actuator	24v	M20	HFH
221002	KL1-P ½NPT 24v LED only	24v	½NPT	None
221002A	KL1-P ½NPT 24v LED only – std actuator	24v	½NPT	Standard
221002F	KL1-P ½NPT 24v LED only – flat actuator	24v	½NPT	Flat
221002HF	KL1-P ½NPT 24v LED only – HF actuator	24v	½NPT	HF
221002HFH	KL1-P ½NPT 24v LED only – HFH actuator	24v	½NPT	HFH
221004	KL1-P M20 110v LED only	110v	M20	None
221004A	KL1-P M20 110v LED only – std actuator	110v	M20	Standard
221004F	KL1-P M20 110v LED only – flat actuator	110v	M20	Flat
221004HF	KL1-P M20 110v LED only – HF actuator	110v	M20	HF
221004HFH	KL1-P M20 110v LED only – HFH actuator	110v	M20	HFH
221005	KL1-P ½NPT 110v LED only	110v	½NPT	None
221005A	KL1-P ½NPT 110v LED only – std actuator	110v	½NPT	Standard
221005F	KL1-P ½NPT 110v LED only – flat actuator	110v	½NPT	Flat
221005HF	KL1-P ½NPT 110v LED only – HF actuator	110v	½NPT	HF
221005HFH	KL1-P ½NPT 110v LED only – HFH actuator	110v	½NPT	HFH
221007	KL1-P M20 230v LED only	230v	M20	None
221007A	KL1-P M20 230v LED only – std actuator	230v	M20	Standard
221007F	KL1-P M20 230v LED only – flat actuator	230v	M20	Flat
221007HF	KL1-P M20 230v LED only – HF actuator	230v	M20	HF
221007HFH	KL1-P M20 230v LED only – HFH actuator	230v	M20	HFH
221008	KL1-P ½NPT 230v LED only	230v	½NPT	None
221008A	KL1-P ½NPT 230v LED only – std actuator	230v	½NPT	Standard
221008F	KL1-P ½NPT 230v LED only – flat actuator	230v	½NPT	Flat
221008HF	KL1-P ½NPT 230v LED only – HF actuator	230v	½NPT	HF
221008HFH	KL1-P ½NPT 230v LED only – HFH actuator	230v	½NPT	HFH

Note
The LED only version uses a single LED to display guard status and the lock status is monitored via a normally closed output.

Technical Data
Certificates	cULus
Technology	Power to Unlock
Housing Material	Red Polyester
Head Material	316 Grade Stainless Steel
Solenoid Voltage (by part number)	24V ac/dc or 110V. ac or 230V. ac +/- 10% (12W.)
LED 2 (if fitted) Supply Voltage	24V dc +/- 10%
Safety Contacts 11/12 21/22	Utilization Category AC15 A300 3A. Thermal Current (Ith) 5A
Overload protection fuse (fuse externally)	10A. (FF)
Auxiliary Contact 33/34	24V.ac/dc 0.5A. Maximum
Auxiliary Contact 43/44	230V.ac/dc 0.5A. Maximum
Rated Insulation Voltage	600VAC
Rated Impulse Withstand Volt	2500VAC
Travel for Positive Opening	10mm
Approach Speed	200mm/m. to 1000mm/s
Man. Actuation Frequency	2 cycle/sec
Actuator entry minimum radius	175mm Standard 100mm Flexible
Enclosure Protection	IP67
Operating Temperature	-25 ... +40 °C
Holding Force	F1Max: 2000N. Fzh: 1538N
Vibration	IEC 68-2-6, 10-55Hz+1Hz, Excursion: 0.35mm, 1 octave/min
Conduit Entry	M20 or 1/2" NPT
Fixing	4 x M5

Information with regard to UL Standards
Enclosure	Type 1
Maximum temperature	+40 °C
Terminal Torque	e 6 lb ins. (0.7Nm)
Use 16-28AWG stranded copper conductors (rated 90°C)
Intended for same polarity use. A300 Pilot Duty. 240V. 3A
PF 0.38 or greater, tested for 6,000 cycles endurance
Use one polymeric conduit connection
Not suitable for connection to rigid metal conduit
KL1-P Earth bonding terminal inside enclosure if required, use 16-12AWG conductors)