KL1-P QC-M12 Guard Locking Safety Switch with M12 Quick Connect

The KL1-P (LEILOCK) guard locking safety interlock features a compact plastic body and a holding force of up to 1400N to keep small to medium guard doors closed until hazards have been removed.

Body manufactured from High Specification Polyester – Red
Head manufactured from 316 Stainless Steel
Holding Force up to F1Max 1400N (140Kg)
Actuation via Rotating head for up to 4 entry positions
Ingress Protection up to IP67
Connectivity via Integrated M12 8way connector with 250mm pigtail and gland

Part No.	Part Description	Voltage	Connectivity	Actuator
221003	KL1-P QC M12 8way 24v LED only	24v	QC M12 8way	No Actuator
221003A	KL1-P QC M12 8way 24v LED only – std actuator	24v	QC M12 8way	A – Standard Actuator
221003F	KL1-P QC M12 8way 24v LED only – flat actuator	24v	QC M12 8way	F – Flat Actuator
221003HF	KL1-P QC M12 8way 24v LED only – HF actuator	24v	QC M12 8way	HF – Metal Flexible Actuator
221003HFH	KL1-P QC M12 8way 24v LED only – HFH actuator	24v	QC M12 8way	HFH – Stainless Steel Flexible Actuator
221006	KL1-P QC M12 8way 110v LED only	110v	QC M12 8way	No Actuator
221006A	KL1-P QC M12 8way 110v LED only – std actuator	110v	QC M12 8way	A – Standard Actuator
221006F	KL1-P QC M12 8way 110v LED only – flat actuator	110v	QC M12 8way	F – Flat Actuator
221006HF	KL1-P QC M12 8way 110v LED only – HF actuator	110v	QC M12 8way	HF – Metal Flexible Actuator
221006HFH	KL1-P QC M12 8way 110v LED only – HFH actuator	110v	QC M12 8way	HFH – Stainless Steel Flexible Actuator
221009	KL1-P QC M12 8way 230v LED only	230v	QC M12 8way	No Actuator
221009A	KL1-P QC M12 8way 230v LED only – std actuator	230v	QC M12 8way	A – Standard Actuator
221009F	KL1-P QC M12 8way 230v LED only – flat actuator	230v	QC M12 8way	F – Flat Actuator
221009HF	KL1-P QC M12 8way2 230v LED only – HF actuator	230v	QC M12 8way	HF – Metal Flexible Actuator
221009HFH	KL1-P QC M12 8way 230v LED only – HFH actuator	230v	QC M12 8way	HFH – Stainless Steel Flexible Actuator

Note
The LED-only version provides guard status indication through a single LED, with lock status monitored separately via a normally closed output

Technical Data
Certificates	cULus
Technology	Power to Unlock
Housing Material	Red Polyester
Head Material	316 Grade Stainless Steel
Solenoid Voltage (by part number)	24V ac/dc or 110V. ac or 230V. ac +/- 10% (12W.)
LED 2 (if fitted) Supply Voltage	24V dc +/- 10%
Safety Contacts 11/12 21/22	Utilization Category AC15 A300 3A. Thermal Current (Ith) 5A
Overload protection fuse (fuse externally)	10A. (FF)
Auxiliary Contact 33/34	24V.ac/dc 0.5A. Maximum
Auxiliary Contact 43/44	230V.ac/dc 0.5A. Maximum
Rated Insulation Voltage	600VAC
Rated Impulse Withstand Volt	2500VAC
Travel for Positive Opening	10mm
Approach Speed	200mm/m. to 1000mm/s
Man. Actuation Frequency	2 cycle/sec
Actuator entry minimum radius	175mm Standard 100mm Flexible
Enclosure Protection	IP67
Operating Temperature	-25 ... +40 °C
Holding Force	F1Max: 2000N. Fzh: 1538N
Vibration	IEC 68-2-6, 10-55Hz+1Hz, Excursion: 0.35mm, 1 octave/min
Conduit Entry	M20 or 1/2" NPT
Fixing	4 x M5

Information with regard to UL Standards
Enclosure	Type 1
Maximum temperature	+40 °C
Terminal Torque	e 6 lb ins. (0.7Nm)
Use 16-28AWG stranded copper conductors (rated 90°C)
Intended for same polarity use. A300 Pilot Duty. 240V. 3A
PF 0.38 or greater, tested for 6,000 cycles endurance
Use one polymeric conduit connection
Not suitable for connection to rigid metal conduit
KL1-P Earth bonding terminal inside enclosure if required, use 16-12AWG conductors)