Leading Manufacturer of Safety Interlock Switches and Machine Guard Safety Switch Devices for Automation and Process Safety

Magnetic Non-Contact Safety Interlock Switch (BPR: M18)

IDEMAG are non-contact, magnetic safety switches designed for use on machinery and equipment to ensure the safety of the operators and prevent accidents. The BPR is housed in a red polyester M18 enclosure that is fixed in place via two nuts.

  • Housed in an M18 Threaded Barrel
  • 2 N/C + 1 N/O Contact Configuration
  • Sensing Distance up to10mm Operation
  • Connection via Pre-Wired Cable or M12 Quick Connect
  • 0.5A ac/dc Switching Capacity
Part NumberPart DescriptionSafetyAuxiliaryConnection
415014BPR 5M ‘2NC 1NO’2NC1NO5M PRE-WIRED
415015BPR 10M ‘2NC 1NO’2NC1NO10M PRE-WIRED
415016BPR QC M12 8way ‘2NC 1NO’2NC1NO250mm Leaded M12 8way

Note
Supplied with fixing nuts.

Technical Data
CertificatesTUV, cULus
Coding Level according to EN ISO 14119Low
TechnologyMagnetic
Housing MaterialRed, Polyester
Normally Closed ContactsUp to 2 N/C Safety
Normally Open ContactsUp to 1 N/O Auxiliary
Contact Release Time<2ms
Tolerance to Misalignment5mm in any direction from 5mm setting gap
Connectivity2m, 5m, 10m, M12 QC
Length75mm
Width18mm
Height18mm
IP RatingIP67
Ambient Temperature-25 ... +80 °C
Storage Temperature-25 ... +80 °C
Switching Current, Minimum10V. Dc 1mA
Switching Voltage, Maximum (2NC)240V.ac / 24V.dc 1.0A. max. (Fuse externally 0.5A. (F).
Auxiliary Circuits (NO)24V.ac/dc 0.2A. max.
Switching Frequency1.0Hz max.
Approach Speed200mm/m. to 1000mm/s
CablePVC 6.0mm OD Conductors 0.25 sq.mm

Safety Classification and Reliability Data
ISO 13849-1Up to PLe Category 4 (if both channels are used with a PLe control device)
B10d3,300,000 cycles at 100mA load
Usage8 cycles/hour 24 hours/365 days per year MTTFd is 470 years