Safety Rope Pull Switch with Dual Head for Hazardous Areas (GLHD-Ex)

The GLHD-EX heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.

Body Material: Die-Cast Metal; Painted Yellow
Ingress Protection: IP67
Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
Cable Length (1 Switch): 100m left / 100m right
Cable Length (3 Switches): 125m left / 125m right
Zones: 1, 21, 2, 22
Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db

Part Number	Part Description
141003	GLHD-EX 3M ‘1NC 1NO’ c/w E-Stop
141014	GLHD-EX 3M ‘3NC 1NO’ c/w E-Stop
141017	GLHD-EX 3M ‘2NC’ c/w E-Stop
141018	GLHD-EX 3M ‘2NC 2NO’ c/w E-Stop

Important Note
Comes with 3m of pre-wired cable (longer available on request).

Technical Data
Approvals	IECEx, cULus on LS-Ex Internal Contact Block
Technology	Safety Rope Pull Switch
Housing Material	Painted Die-Cast Aluminum
Operating Temperature	-25 ... +80 °C
Enclosure Protection	IP67
Rope Spans	Up to 250m
Rope Type	4.0mm Outside Dia. Steel inner-PVC sheath
Switching frequency (LS-Ex)	1.0 Hz maximum
Mechanical Life Expectancy (LS-Ex)	1,000,000 switches
Electrical Life Expectancy (LS-Ex)	Tested to 1,000,000 cycles at 24V. 0.2A