Miniature Belt Alignment Switch – Explosion Proof, 22mm Diameter with 70mm Length Roller (HLM-SS-CBA-EX)

IDEM’s Stainless Steel miniature conveyor belt alignment switches are designed for use on the running edge of conveyor belts. They are suitable for both indoor and outdoor use and can withstand extreme weather conditions. Unlike the larger belt alignment switches, the mini duty versions only feature a stop signal.

Body Material: 316 Stainless Steel Body / Stainless Steel or Plastic Roller
Ingress Protection: IP67 / IP69K
Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
Zones: 1, 21, 2, 22
Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db

Part No.	Part Description
175413	Belt Switch Plastic Roller 1NC 1NO 3m Pre-Wired
175414	Belt Switch Plastic Roller 2NC 3m Pre-Wired
175415	Belt Switch Plastic Roller 2NC 2NO 3m Pre-Wired
175463	Belt Switch Stainless Steel Roller 1NC 1NO 3m Pre-Wired
175464	Belt Switch Stainless Steel Roller 2NC 3m Pre-Wired
175465	Belt Switch Stainless Steel Roller 2NC 2NO 3m Pre-Wired

Important Note
Comes with 3m of pre-wired cable (longer available on request).

Technical Data
Approvals	IECEx, cULus on LS-Ex Internal Contact Block
Technology	Belt Alignment Switch
Housing Material	316 Grade Stainless Steel
Roller Material	Polyester or 316 Grade Stainless Steel
Enclosure Protection	IP67, IP69K (NEMA 6)
Typical operating parameters	0.4Nm Torque 15-30 degrees contact changeover
Switching frequency (LS-Ex)	1.0 Hz maximum
Mechanical Life Expectancy (LS-Ex)	1,000,000 switches
Electrical Life Expectancy (LS-Ex)	Tested to 1,000,000 cycles at 24V. 0.2A