Emergency Stop Button Station with Shroud for Hazardous Areas (ESL-SSP-EX)

The ESL-SS(P)-Ex heavy duty Emergency Stop Switches are designed to provide robust Emergency Stop protection for exposed conveyors or machines. The IP69K enclosure protection is maintained by a double seal gasket and anti-rust, stainless steel internal screws. The button shroud is designed to protect against accidental activation or damage.

Body Material: Rugged 316 Grade Stainless Steel
Ingress Protection: IP69K
Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
Zones: 1, 21, 2, 22
Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db

Part Number	Part Description
232015	ESL-SS(P)-Ex 3M ‘1NC 1NO’
232016	ESL-SS(P)-Ex 3M ‘2NC’
232030	ESL-SS(P)-Ex 3M ‘2NC 2NO’

Important Note
Comes with 3m of pre-wired cable (longer available on request).
Where the risk assessment identifies that inadvertent operation of the E-Stop button may occur during use or breakage and loss of the button function is foreseen, it may be preferable to specify the protection shroud version.
When required by local regulations, please affix the supplied yellow emergency stop sticker.

Technical Data
Approvals	IECEx, cULus on LS-Ex Internal Contact Block
Technology	Emergency Stop, Twist-To-Release
Housing Material	316 Grade Stainless Steel
Button Material	UV Resistant Polyester
Operating Temperature	-25 ... +80 °C
Enclosure Protection	IP67, IP69K (NEMA 6)
Switching frequency (LS-Ex)	1.0 Hz maximum
Mechanical Life Expectancy (LS-Ex)	1,000,000 switches
Electrical Life Expectancy (LS-Ex)	Tested to 1,000,000 cycles at 24V. 0.2A