Guard Locking RFID Safety Switch with Control Functionality, Trapped Key and Rear Release (KLM-Z-SKR-5ST-RR)
The KLM-Z-SKR-5ST-RR is a Type 4 guard locking RFID safety switch with OSSD outputs, integrated machine control functionality, and a coded trapped personnel key.
Designed for applications where guard locking, local machine control, and controlled access are required in one compact device, the KLM-Z-SKR-5ST-RR can incorporate up to five 22mm control elements. This helps reduce the number of separate devices required at the gate, simplifies wiring, and provides operators with convenient control directly at the access point.
The coded personnel key is designed to be removed and taken into the guarded area by the operator or maintenance personnel. While the key is removed, the safety circuit cannot be reset, helping to prevent inadvertent machine start-up while work is being carried out inside the safeguarded area.
The slim profile body mounts directly to 50mm frame sections, making it ideal for machine guarding applications where space is limited. The actuator head allows both front and end entry and can be rotated to provide up to eight actuation directions, offering excellent flexibility during installation.
- Type 4, High Coded RFID Sensing
- 3000N Holding Force
- OSSD Outputs for Series Connection
- Up to 5 Positions for Pilot Devices
- Robust Metal Body and Stainless Steel Head
- Mechanical Rear Release Button
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part No. | Description | Manual Release | Rear Release (Escape) | Connectivity |
|---|---|---|---|---|
| 457014 | KLM-Z-SKR-5ST-RR M20, Side Release, Rear Release | Yes | Yes | M20 |
| 457015 | KLM-Z-SKR-5ST-RR 1/2" NPT, Side Release, Rear Release | Yes | Yes | 1/2" NPT |
| 457016 | KLM-Z-SKR-5ST-RR 8way QC-M12, Side Release, Rear Release | Yes | Yes | 8way QC-M12 |
| 457314 | KLM-Z-SKR-5ST-RR M20, No Manual Release, Rear Release | No | Yes | M20 |
| 457315 | KLM-Z-SKR-5ST-RR 1/2" NPT, No Manual Release, Rear Release | No | Yes | 1/2" NPT |
| 457316 | KLM-Z-SKR-5ST-RR 8way QC-M12, No Manual Release, Rear Release | No | Yes | 8way QC-M12 |
| Note |
|---|
| Key sold seperetaly. |
| Technical Data | |
|---|---|
| Approvals | TUV, cULus |
| Classification and Coding Level according to EN ISO 14119 | Type 4, High |
| Technology | RFID, Power to Unlock |
| Housing Material | Painted Die-Cast Metal |
| Head Material | 316 Grade Stainless Steel |
| Supply Voltage | 24Vdc (+/- 10%) SELV/PELV or Class 2 |
| Power Consumption | R+ (50mA Max.) / S+ (500mA Max.) (Solenoid) |
| Safety Circuits | 2 OSSD PNP Outputs (24Vdc 200mA max. switching) |
| Auxiliary Circuits (34 & 44) | 24Vdc 200mA max. Output feed |
| Rated Insulation Voltage | 500VAC |
| Rated Impulse withstand | 1000VAC |
| Holding Force (ISO14119) | F1Max 3000N Fzh 2307N |
| Actuator insertion for locking | 5mm |
| Sao / Sar (RFID) | 15mm / 25mm |
| Operating Frequency | 1Hz |
| Actuator entry minimum radius | 175mm |
| Enclosure Protection | IP65 |
| Operating Temperature | -25 ... +40 °C |
| Mechanical Life Expectancy (B10d) | 2.5 x 10 6 cycles at 100mA load |
| Vibration | IEC68-2-6, 10-55Hz+1Hz Excursion: 0.35mm, 1 octave/min |
| Characteristic data according to IEC62061 (used as a subsystem) | |
|---|---|
| Safety Integrity Level | SIL 3 |
| PFH (1/h) | 1.0 E-09 (Corresponds to 1% of SIL3) |
| PFD (Av.) | 8.7 E-05 (Corresponds to 9% of SIL3) |
| Proof Test Interval T1 | 20a |
| Characteristic data according to EN ISO13849-1 | |
|---|---|
| Performance Level | e |
| Category | Cat 4 |
| MTTFd | 771a |
| Diagnostic Coverage DC | High |
| Information with regard to UL Standards |
|---|
| Type 1 enclosure. Use Class 2 power supply or equivalent. Maximum temperature 40°C. Use 16-28AWG copper conductors (rated 90°C). Terminal Torque 6 lb ins. (0.7Nm). Intended for same polarity use. Safety Circuits (11-12 & 21-22) 24V.dc 200mA max. Use one polymeric conduit connection. Not suitable for connection to rigid metal conduit. (Earth bonding terminal inside metal enclosures (if required). Use 16-12AWG conductors) |
