Emergency Stop Device with Shroud 4-Pole Contacts in 316 Stainless Steel (ESL-SS-P)

IDEM’s Heavy Duty Emergency Stop Switches are designed to provide robust Emergency Stop protection for exposed conveyors or machines. The IP69K enclosure protection is maintained by a double seal gasket and anti-rust, stainless steel internal screws.

Body Material: Rugged 316 Grade Stainless Steel
Ingress Protection: IP69K
Contacts: 4NC, 3NC + 1NO or 2NC + 2NO
Conduits: 3 x M20 or ½” NPT

Part Number	Part Description	Conduit Type	Contacts
232009	ESL-SS(P) M20 2NC 2NO	M20	2NC 2NO
232010	ESL-SS(P) ½”NPT 2NC 2NO	½”NPT	2NC 2NO
232011	ESL-SS(P) M20 3NC 1NO	M20	3NC 1NO
232012	ESL-SS(P) ½”NPT 3NC 1NO	½”NPT	3NC 1NO
232013	ESL-SS(P) M20 4NC	M20	4NC
232014	ESL-SS(P) ½”NPT 4NC	½”NPT	4NC

Important Note
Where the risk assessment identifies that inadvertent operation of the E-Stop button may occur during use or breakage and loss of the button function is foreseen, it may be preferable to specify the protection shroud version. When required by local regulations, please affix the supplied yellow emergency stop sticker.

Technical Data
Approvals	cULus
Technology	Emergency Stop, Twist-To-Release
Housing Material	316 Grade Stainless Steel
Shroud Material	316 Grade Stainless Steel
Button Material	UV Resistant Polyester
Safety Contact type	IEC 60947-5-1 Double break Type Zb
Termination	Clamp up to 2.5 sq. mm conductors
Rating	Utilisation Category : AC15
Operational Rating	AC15 A300 240V. 3A /120V 6A. ac
Thermal Current (Ith)	10A
Rated Insulation Voltage (Ui)	500V
Withstand Voltage (Uimp)	2500V
Short Circuit Overload Protection	Fuse Externally 10A. (FF)
Operating Temperature	-25 ... +80 °C
Enclosure Protection	P67, IP69K (NEMA 6)

Safety Classification and Reliability Data
Mechanical Reliability B10d	1.5 x 10 6 operations at 100mA load
ISO 13849-1	up to PLe depending upon system architecture
EN 62061	up to SIL3 depending upon system architecture
Safety Data - Annual Usage	8 cycles per hour / 24 hours per day / 365 days MTTFd 214 years

INFORMATION WITH REGARD TO UL508
Type 1 Enclosure Contact Blocks A300 230V/3A 120V/6A Wire range: 16AWG – 12AWG Stranded Copper Conductors Terminal Torque 7lb/in (0.8Nm) 24V LED (if fitted) powered by LVLC or Class 2 only.