Emergency Stop Device 3-Pole Contacts in 316 Stainless Steel (ES-SS)

IDEM’s Heavy Duty Emergency Stop Switches are designed to provide robust Emergency Stop protection for exposed conveyors or machines. The IP69K enclosure protection is maintained by a double seal gasket and anti-rust, stainless steel internal screws.

Body Material: Mirror Polished 316 Grade Stainless Steel
Ingress Protection: IP69K
Contacts: 3NC or 2NC + 1NO
Conduits: 2 x M20 or ½” NPT

Part No.	Part Description
231001	ES-SS M20 2NC 1NO
231002	ES-SS ½NPT 2NC 1NO
231003	ES-SS M20 3NC
231004	ES-SS ½NPT 3NC

Important Note
When required by local regulations, please affix the supplied yellow emergency stop sticker.

Technical Data
Approvals	cULus
Technology	Emergency Stop, Twist-To-Release
Housing Material	316 Grade Stainless Steel
Button Material	UV Resistant Polyester
Safety Contact type	IEC 60947-5-1 Double break Type Zb
Termination	Clamp up to 2.5 sq. mm conductors
Rating	Utilisation Category : AC15
Operational Rating	AC15 A300 240V. 3A /120V 6A. ac
Thermal Current (Ith)	10A.
Rated Insulation Voltage (Ui)	500V
Withstand Voltage (Uimp)	2500V.
Short Circuit Overload Protection	Fuse Externally 10A. (FF)
Operating Temperature	-25 ... +80 °C
Enclosure Protection	IP67, IP69K (NEMA 6)

Safety Classification and Reliability Data
Mechanical Reliability B10d	1.5 x 10 6 operations at 100mA load
ISO 13849-1	up to PLe depending upon system architecture
EN 62061	up to SIL3 depending upon system architecture
Safety Data - Annual Usage	8 cycles per hour / 24 hours per day / 365 days MTTFd 214 years

INFORMATION WITH REGARD TO UL508
Type 1 Enclosure Contact Blocks A300 230V/3A 120V/6A Wire range: 16AWG – 12AWG Stranded Copper Conductors Terminal Torque 7lb/in (0.8Nm) 24V LED (if fitted) powered by LVLC or Class 2 only.