Emergency Stop Device with 3-Pole Contacts (ES-P)

The ES-P emergency stop button is used to immediately halt hazardous processes or machinery in order to prevent or minimize injury to personnel or damage to equipment. IDEM’s Standard Duty Emergency Stop Switches are designed to provide robust Emergency Stop protection for exposed conveyors or machines.

Conformance to ISO13850, IEC60947-5-1 and IEC60947-5-5.

Designed with a special lid safety trip mechanism means that the safety contacts will open if the lid is removed from the Emergency Stop Switch adding an extra level of protection.

Body Material: High Specification Polyester in Yellow
Ingress Protection: IP67
Contacts: 3NC or 2NC + 1NO
Conduits: 2 x M20 or ½” NPT Knockout

Part Number	Part Description	Contact Configuration	Conduit
230001	ES-P Knockout M20 ½NPT 2NC 1NO	2 N/C + 1 N/O	M20 1/2" NPT Knockout
230002	ES-P Knockout M20 ½NPT 3NC	3 N/C	M20 1/2" NPT Knockout

Technical Data
Approvals	cULus
Technology	Emergency Stop, Twist-To-Release
Housing Material	Yellow Polyester
Button Material	UV Resistant Polyester
Safety Contact type	IEC 60947-5-1 Double break Type Zb
Termination	Clamp up to 2.5 sq. mm conductors
Rating	Utilisation Category : AC15
Operational Rating	AC15 A300 240V. 3A /120V 6A. ac
Thermal Current (Ith)	10A.
Rated Insulation Voltage (Ui)	500V
Withstand Voltage (Uimp)	2500V.
Short Circuit Overload Protection	Fuse Externally 10A. (FF)
Operating Temperature	-25 ... +80 °C
Enclosure Protection	IP67

Safety Classification and Reliability Data
Mechanical Reliability B10d	1.5 x 10 6 operations at 100mA load
ISO 13849-1	up to PLe depending upon system architecture
EN 62061	up to SIL3 depending upon system architecture
Safety Data - Annual Usage	8 cycles per hour / 24 hours per day / 365 days MTTFd 214 years

INFORMATION WITH REGARD TO UL508
Type 1 Enclosure Contact Blocks A300 230V/3A 120V/6A Wire range: 16AWG – 12AWG Stranded Copper Conductors Terminal Torque 7lb/in (0.8Nm) 24V LED (if fitted) powered by LVLC or Class 2 only.