Mini Belt Alignment Switch – Stainless Steel, 22mm Diameter with 70mm Length Roller (HLM-SS-CBA)
IDEM’s stainless steel mini conveyor belt alignment switches are designed for use on the running edge of conveyor belts. They are suitable for both indoor and outdoor use and can withstand extreme weather conditions. Unlike the larger belt alignment switches, the mini duty versions only feature a stop signal.
- Body Material: Mirror Polished Stainless Steel 316; ideal for exposure to chemical cleaning agents
- Roller Material: 316 Stainless Steel
- Ingress Protection: IP69K
- Contacts: 1NC+1NO (Snap Acting) / 3NC+1NO / 2NC+2NO / 4NC
- Connectivity: 1 x M20 or ½” NPT Conduits
- Part Numbers
- Technical Specifications
- Technical Drawings
- Downloads
- Accessories
- Related Products
- Sistema & Certificates
| Part No. | Part Description |
|---|---|
| 175401 | HLM-SS-CBA with Plastic Roller M20 2NC 2NO |
| 175402 | HLM-SS-CBA with Plastic Roller ½ NPT 2NC 2NO |
| 175403 | HLM-SS-CBA with Plastic Roller QC M23 2NC 2NO |
| 175404 | HLM-SS-CBA with Plastic Roller M20 3NC 1NO |
| 175405 | HLM-SS-CBA with Plastic Roller ½ NPT 3NC 1NO |
| 175406 | HLM-SS-CBA with Plastic Roller QC M23 3NC 1NO |
| 175407 | HLM-SS-CBA with Plastic Roller M20 4NC |
| 175408 | HLM-SS-CBA with Plastic Roller ½ NPT 4NC |
| 175409 | HLM-SS-CBA with Plastic Roller QC M23 4NC |
| 175410 | HLM-SS-CBA with Plastic Roller M20 1NC 1NO SNAP |
| 175411 | HLM-SS-CBA with Plastic Roller ½ NPT 1NC 1NO SNAP |
| 175412 | HLM-SS-CBA with Plastic Roller QC M23 1NC 1NO SNAP |
| 175413 | HLM-SS-CBA-EX switch c/w Plastic Roller 1NC 1NO |
| 175414 | HLM-SS-CBA-EX Switch c/w Plastic Roller 2NC |
| 175415 | HLM-SS-CBA-EX Switch c/w Plastic Roller 2NC 2NO |
| 175451 | HLM-SS-CBA with SS Roller M20 2NC 2NO |
| 175452 | HLM-SS-CBA with SS Roller ½ NPT 2NC 2NO |
| 175453 | HLM-SS-CBA with SS Roller QC M23 2NC 2NO |
| 175454 | HLM-SS-CBA with SS Roller M20 3NC 1NO |
| 175455 | HLM-SS-CBA with SS Roller ½ NPT 3NC 1NO |
| 175456 | HLM-SS-CBA with SS Roller QC M23 3NC 1NO |
| 175457 | HLM-SS-CBA with SS Roller M20 4NC |
| 175458 | HLM-SS-CBA with SS Roller ½ NPT 4NC |
| 175459 | HLM-SS-CBA with SS Roller QC M23 4NC |
| 175460 | HLM-SS-CBA with SS Roller M20 1NC 1NO SNAP |
| 175461 | HLM-SS-CBA with SS Roller ½ NPT 1NC 1NO SNAP |
| 175462 | HLM-SS-CBA with SS Roller QC M23 1NC 1NO SNAP |
| Technical Data | |
|---|---|
| Approvals | cULus |
| Technology | Mini Belt Alignment Switch |
| Housing Material | 316 Grade Stainless Steel |
| Roller Material | 316 Grade Stainless Steel or Polyester |
| Enclosure Protection | IP67, IP69K (IP67 at the connector) |
| Operating Temperature | -25 ... +80 °C |
| Typical operating parameters | 0.4Nm Torque 15-30 degrees contact changeover |
| Mechanical Life Expectancy | 500,000 Cycles |
| Vibration | IEC 68-2-6, 10-55Hz 0.35mm |
| Conductor size | 1.5 sq.mm |
| Fixing | M5 Bolts (Torque 2.0Nm) |
| Utilization Category | AC15 A300 240V. 3A |
| Min Current | 5V, 5mA, DC |
| Thermal Current (Ith) | 10A |
| Rated Impulse Withstand Volt | 2500VAC |
| Information with regard to UL 508 |
|---|
| Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required. |
