Mini Belt alignment switch die cast ip67

Mini Belt Alignment Switch – Die-Cast, 22mm Diameter with 70mm Length Roller (HLM-CBA)

IDEM’s die-cast, mini conveyor belt alignment switches are designed for use on the running edge of conveyor belts. They are suitable for both indoor and outdoor use and are sealed to IP67. Unlike the larger belt alignment switches, the mini duty versions only provide a stop signal.

Body Material: Die-Cast Metal Painted Red and Black
Roller Material: Plastic or 316 Stainless Steel
Ingress Protection: IP67
Contacts: 1NC+1NO (Snap Acting) / 3NC+1NO / 2NC+2NO / 4NC
Connectivity: 1 x M20 or ½” NPT Conduit

Part No.	Part Description
174401	HLM-CBA with Plastic Roller M20 2NC 2NO
174402	HLM-CBA with Plastic Roller ½ NPT 2NC 2NO
174403	HLM-CBA with Plastic Roller QC M23 2NC 2NO
174404	HLM-CBA with Plastic Roller M20 3NC 1NO
174405	HLM-CBA with Plastic Roller ½ NPT 3NC 1NO
174406	HLM-CBA with Plastic Roller QC M23 3NC 1NO
174407	HLM-CBA with Plastic Roller M20 4NC
174408	HLM-CBA with Plastic Roller ½ NPT 4NC
174409	HLM-CBA with Plastic Roller QC M23 4NC
174410	HLM-CBA with Plastic Roller M20 1NC 1NO SNAP
174411	HLM-CBA with Plastic Roller ½ NPT 1NC 1NO SNAP
174412	HLM-CBA with Plastic Roller QC M23 1NC 1NO SNAP
174451	HLM-CBA with SS Roller M20 2NC 2NO
174452	HLM-CBA with SS Roller ½ NPT 2NC 2NO
174453	HLM-CBA with SS Roller QC M23 2NC 2NO
174454	HLM-CBA with SS Roller M20 3NC 1NO
174455	HLM-CBA with SS Roller ½ NPT 3NC 1NO
174456	HLM-CBA with SS Roller QC M23 3NC 1NO
174457	HLM-CBA with SS Roller M20 4NC
174458	HLM-CBA with SS Roller ½ NPT 4NC
174459	HLM-CBA with SS Roller QC M23 4NC
174460	HLM-CBA with SS Roller M20 1NC 1NO SNAP
174461	HLM-CBA with SS Roller ½ NPT 1NC 1NO SNAP
174462	HLM-CBA with SS Roller QC M23 1NC 1NO SNAP

Technical Data
Approvals	cULus
Technology	Mini Belt Alignment Switch
Housing Material	Painted Die-Cast Metal
Roller Material	316 Grade Stainless Steel or Polyester
Enclosure Protection	IP67
Operating Temperature	-25 ... +80 °C
Typical operating parameters	0.4Nm Torque 15-30 degrees contact changeover
Mechanical Life Expectancy	500,000 Cycles
Vibration	IEC 68-2-6, 10-55Hz 0.35mm
Conductor size	1.5 sq.mm
Fixing	M5 Bolts (Torque 2.0Nm)
Utilization Category	AC15 A300 240V. 3A
Min Current	5V, 5mA, DC
Thermal Current (Ith)	10A
Rated Impulse Withstand Volt	2500VAC

Information with regard to UL 508
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.