Leading Manufacturer of Safety Interlock Switches and Machine Guard Safety Switch Devices for Automation and Process Safety

Mini Belt Alignment Switch – Stainless Steel, 22mm Diameter with 70mm Length Roller (HLM-SS-CBA)

IDEM’s stainless steel mini conveyor belt alignment switches are designed for use on the running edge of conveyor belts. They are suitable for both indoor and outdoor use and can withstand extreme weather conditions. Unlike the larger belt alignment switches, the mini duty versions only feature a stop signal.

  • Body Material: Mirror Polished Stainless Steel 316; ideal for exposure to chemical cleaning agents
  • Roller Material: 316 Stainless Steel
  • Ingress Protection: IP69K
  • Contacts: 1NC+1NO (Snap Acting) / 3NC+1NO / 2NC+2NO / 4NC
  • Connectivity: 1 x M20 or ½” NPT Conduits
Part No.Part Description
175401HLM-SS-CBA with Plastic Roller M20 2NC 2NO
175402HLM-SS-CBA with Plastic Roller ½ NPT 2NC 2NO
175403HLM-SS-CBA with Plastic Roller QC M23 2NC 2NO
175404HLM-SS-CBA with Plastic Roller M20 3NC 1NO
175405HLM-SS-CBA with Plastic Roller ½ NPT 3NC 1NO
175406HLM-SS-CBA with Plastic Roller QC M23 3NC 1NO
175407HLM-SS-CBA with Plastic Roller M20 4NC
175408HLM-SS-CBA with Plastic Roller ½ NPT 4NC
175409HLM-SS-CBA with Plastic Roller QC M23 4NC
175410HLM-SS-CBA with Plastic Roller M20 1NC 1NO SNAP
175411HLM-SS-CBA with Plastic Roller ½ NPT 1NC 1NO SNAP
175412HLM-SS-CBA with Plastic Roller QC M23 1NC 1NO SNAP
175413HLM-SS-CBA-EX switch c/w Plastic Roller 1NC 1NO
175414HLM-SS-CBA-EX Switch c/w Plastic Roller 2NC
175415HLM-SS-CBA-EX Switch c/w Plastic Roller 2NC 2NO
175451HLM-SS-CBA with SS Roller M20 2NC 2NO
175452HLM-SS-CBA with SS Roller ½ NPT 2NC 2NO
175453HLM-SS-CBA with SS Roller QC M23 2NC 2NO
175454HLM-SS-CBA with SS Roller M20 3NC 1NO
175455HLM-SS-CBA with SS Roller ½ NPT 3NC 1NO
175456HLM-SS-CBA with SS Roller QC M23 3NC 1NO
175457HLM-SS-CBA with SS Roller M20 4NC
175458HLM-SS-CBA with SS Roller ½ NPT 4NC
175459HLM-SS-CBA with SS Roller QC M23 4NC
175460HLM-SS-CBA with SS Roller M20 1NC 1NO SNAP
175461HLM-SS-CBA with SS Roller ½ NPT 1NC 1NO SNAP
175462HLM-SS-CBA with SS Roller QC M23 1NC 1NO SNAP

Technical Data
ApprovalscULus
TechnologyMini Belt Alignment Switch
Housing Material316 Grade Stainless Steel
Roller Material 316 Grade Stainless Steel or Polyester
Enclosure ProtectionIP67, IP69K (IP67 at the connector)
Operating Temperature-25 ... +80 °C
Typical operating parameters0.4Nm Torque 15-30 degrees contact changeover
Mechanical Life Expectancy500,000 Cycles
VibrationIEC 68-2-6, 10-55Hz 0.35mm
Conductor size1.5 sq.mm
FixingM5 Bolts (Torque 2.0Nm)
Utilization CategoryAC15 A300 240V. 3A
Min Current5V, 5mA, DC
Thermal Current (Ith)10A
Rated Impulse Withstand Volt2500VAC

Information with regard to UL 508
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.