Leading Manufacturer of Safety Interlock Switches and Machine Guard Safety Switch Devices for Automation and Process Safety

Mini Belt Alignment Switch – Die-Cast, 22mm Diameter with 70mm Length Roller (HLM-CBA)

IDEM’s die-cast, mini conveyor belt alignment switches are designed for use on the running edge of conveyor belts. They are suitable for both indoor and outdoor use and are sealed to IP67. Unlike the larger belt alignment switches, the mini duty versions only provide a stop signal.

  • Body Material: Die-Cast Metal Painted Red and Black
  • Roller Material: Plastic or 316 Stainless Steel
  • Ingress Protection: IP67
  • Contacts: 1NC+1NO (Snap Acting) / 3NC+1NO / 2NC+2NO / 4NC
  • Connectivity: 1 x M20 or ½” NPT Conduit
Part No.Part Description
174401HLM-CBA with Plastic Roller M20 2NC 2NO
174402HLM-CBA with Plastic Roller ½ NPT 2NC 2NO
174403HLM-CBA with Plastic Roller QC M23 2NC 2NO
174404HLM-CBA with Plastic Roller M20 3NC 1NO
174405HLM-CBA with Plastic Roller ½ NPT 3NC 1NO
174406HLM-CBA with Plastic Roller QC M23 3NC 1NO
174407HLM-CBA with Plastic Roller M20 4NC
174408HLM-CBA with Plastic Roller ½ NPT 4NC
174409HLM-CBA with Plastic Roller QC M23 4NC
174410HLM-CBA with Plastic Roller M20 1NC 1NO SNAP
174411HLM-CBA with Plastic Roller ½ NPT 1NC 1NO SNAP
174412HLM-CBA with Plastic Roller QC M23 1NC 1NO SNAP
174451HLM-CBA with SS Roller M20 2NC 2NO
174452HLM-CBA with SS Roller ½ NPT 2NC 2NO
174453HLM-CBA with SS Roller QC M23 2NC 2NO
174454HLM-CBA with SS Roller M20 3NC 1NO
174455HLM-CBA with SS Roller ½ NPT 3NC 1NO
174456HLM-CBA with SS Roller QC M23 3NC 1NO
174457HLM-CBA with SS Roller M20 4NC
174458HLM-CBA with SS Roller ½ NPT 4NC
174459HLM-CBA with SS Roller QC M23 4NC
174460HLM-CBA with SS Roller M20 1NC 1NO SNAP
174461HLM-CBA with SS Roller ½ NPT 1NC 1NO SNAP
174462HLM-CBA with SS Roller QC M23 1NC 1NO SNAP

Technical Data
ApprovalscULus
TechnologyMini Belt Alignment Switch
Housing MaterialPainted Die-Cast Metal
Roller Material316 Grade Stainless Steel or Polyester
Enclosure ProtectionIP67
Operating Temperature-25 ... +80 °C
Typical operating parameters0.4Nm Torque 15-30 degrees contact changeover
Mechanical Life Expectancy500,000 Cycles
VibrationIEC 68-2-6, 10-55Hz 0.35mm
Conductor size1.5 sq.mm
FixingM5 Bolts (Torque 2.0Nm)
Utilization CategoryAC15 A300 240V. 3A
Min Current5V, 5mA, DC
Thermal Current (Ith)10A
Rated Impulse Withstand Volt2500VAC

Information with regard to UL 508
Type 1 Enclosures. Use 16 - 12AWG copper conductors, rated 75ºC minimum. Intended for same polarity use. Electrical Rating: A300 240V.ac 3A. (6,000 cycles) 240V. 10A. carry only. Wire range: 16AWG – 12AWG Copper Torque 7lb/in (0.8Nm) Earth bonding terminal inside enclosure if required.