Safety Rope Switch Pull Cords

Safety Rope Pull Switches

E-Stop Mechanism for Rope Switches (140044 / 140140)

Emergency Stop for Guardian Line Safety Rope Pulls.

Eyebolts (140045 / 140046 / 140126 / 140127)

Available in packs of 8 eyebolts in Stainless Steel or Galvanised. Eyebolts are available in two lengths 84mm long (thread length: 51mm) or 130mm long (thread length: 85mm).

Flexible Roller Eyebolts (140048 / 140099)

When using rope pull switch systems on conveyors, solid metal eyebolts spaced equally along the conveyor support the rope and create a catenary between eyebolts to deflect the rope during pulling; however, misalignment of the eyebolts along the conveyor can cause friction issues, making the system challenging to operate and potentially resulting in rope damage or wear to breaking point if the switch mechanism cannot be reset due to rope immobility caused by friction.
  • Adjustable mounting positions offer flexibility for adjusting in two planes to accommodate uneven positioning of eyebolts along the conveyor or conveyors with radius profiles.
  • Moveable rollers within the eyebolt structure ensure no loss of movement due to friction when pulled in any direction.
  • The position of the rollers allows 360-degree contact with the rope within the eyelet of the eyebolt.
  • Friction is eliminated because the rotational movement at any point of contact between the rope and a roller.

Guardian Line Heavy Duty Safety Rope Pull Switches (GLHL)

The GLHL heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHL can be used on its own or in combination with the GLHD to connect up to 125m rope span from the left side.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches (GLHL-SS)

The GLHL-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHL-SS can be used on its own or in combination with the GLHD-SS to connect up to 125m rope span from the left side.

  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left

NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches (GLHR)

The GLHR heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHR can be used on its own or in combination with the GLHD to connect up to 125m rope span from the right side.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m right
  • Cable Length (2 Switches): 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches (GLHR-SS)

The GLHR-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHR-SS can be used on its own or in combination with the GLHD-SS to connect up to 125m rope span from the left side.
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Dual Head (GLHD)

The GLHD heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m left / 100m right
  • Cable Length (3 Switches): 125m left / 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Dual Head (GLHD-SS)

The GLHD-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • Cable Length (1 Switch): 100m left / 100m right
  • Cable Length (3 Switches): 125m left / 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Dual Head and Indication (GLHD with LED)

The GLHD heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 100m left / 100m right
  • Cable Length (3 Switches): 125m left / 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Dual Head and Indication (GLHD-SS with LED)

The GLHD-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 100m left / 100m right
  • Cable Length (3 Switches): 125m left / 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Indication (GLHL with LED)

The GLHL heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHL can be used on its own or in combination with the GLHD to connect up to 125m rope span from the left side.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Indication (GLHL-SS with LED)

The GLHL-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHL-SS can be used on its own or in combination with the GLHD-SS to connect up to 125m rope span from the left side.

  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 100Vac or 230Vac
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left

NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Indication (GLHR with LED)

The GLHR heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHR can be used on its own or in combination with the GLHD to connect up to 125m rope span from the right side.
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 100m right
  • Cable Length (2 Switches): 125m right
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Heavy Duty Safety Rope Pull Switches with Indication (GLHR-SS with LED)

The GLHR-SS heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHR-SS can be used on its own or in combination with the GLHD-SS to connect up to 125m rope span from the left side.
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 4NC + 2NO
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 100m left
  • Cable Length (2 Switches): 125m left
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Mini Duty Rope Pull Safety Switches (GLM)

The GLM mini duty safety rope pull switch has been designed to protect short to medium conveyor lengths, where protection is required up to 50m (using 2 switches) or up to 30m (using 1 switch).

  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 3-Pole or 4-Pole Contacts
  • Cable Length (1 Switch): 30m
  • Cable Length (2 Switches): 50m
 

Guardian Line Mini Duty Rope Pull Safety Switches (GLM-SS)

The GLM-SS mini duty safety rope pull switch has been designed to protect short to medium conveyor lengths, where protection is required up to 50m (using 2 switches) or up to 30m (using 1 switch).
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 3-Pole or 4-Pole Contacts
  • Cable Length (1 Switch): 30m
  • Cable Length (2 Switches): 50m
NOTE: LED indication available for quick identification of switch status.

Guardian Line Mini Duty Rope Pull Safety Switches with Indication (GLM with LED)

The GLM mini duty safety rope pull switch has been designed to protect short to medium conveyor lengths, where protection is required up to 50m (using 2 switches) or up to 30m (using 1 switch).

  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 3-Pole or 4-Pole Contacts
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 30m
  • Cable Length (2 Switches): 50m
 

Guardian Line Mini Duty Rope Pull Safety Switches with Indication (GLM-SS with LED)

The GLM-SS mini duty safety rope pull switch has been designed to protect short to medium conveyor lengths, where protection is required up to 50m (using 2 switches) or up to 30m (using 1 switch).
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 3-Pole or 4-Pole Contacts
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 30m
  • Cable Length (2 Switches): 50m
NOTE: LED indication available for quick identification of switch status.

Guardian Line Standard Duty Rope Pull Safety Switches (GLS-SS)

The GLS-SS standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch).
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 3-Pole or 4-Pole Contacts
  • Cable Length (1 Switch): 80m
  • Cable Length (2 Switches): 100m
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Standard Duty Rope Pull Safety Switches with Indication (GLS-SS with LED)

The GLS-SS standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch).
  • Body Material: Stainless Steel 316
  • Ingress Protection: IP69K
  • Contacts: 3-Pole or 4-Pole Contacts
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 80m
  • Cable Length (2 Switches): 100m
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Standard Duty Rope Safety Switch (GLS)

The GLS standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch).
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 3-Pole or 4-Pole Contacts
  • Cable Length (1 Switch): 80m
  • Cable Length (2 Switches): 100m
NOTE: FZ models for temperatures down to -40°C.

Guardian Line Standard Duty Rope Safety Switch with Auto-Reset (GLS-AR)

The GLS-AR standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch). The manual reset mechanism has been removed, meaning the GLS-AR will automatically reset upon release of the rope.

  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 3-Pole or 4-Pole Contacts
  • Cable Length (1 Switch): 80m
  • Cable Length (2 Switches): 100m

NOTE: This switch is not an emergency stop, it is a trip switch with automatic reset.

Guardian Line Standard Duty Rope Safety Switch with Indication (GLS with LED)

The GLS standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch).
  • Body Material: Die-Cast Metal; Painted Yellow
  • Ingress Protection: IP67
  • Contacts: 3-Pole or 4-Pole Contacts
  • LED Voltage: 24Vdc, 110Vac or 230Vac
  • Cable Length (1 Switch): 80m
  • Cable Length (2 Switches): 100m
NOTE: FZ models for temperatures down to -40°C.

Pigtail Eyebolts (140047-Short/Long)

Available in packs of 8 eyebolts in Stainless Steel only. Two lengths available: 114mm or 154mm long.

Quick Link Stainless Steel (140079)

For systems up to 50m a Quick Link termination is provided for easy connection to either a Safety Spring or Switch eyebolt

Replacement LED for Guardian Line (LED Bezel PN. 140***)

Visible from long distances and available as Green/Flashing Red in either 24Vdc, 110Vac or 230Vac.

Replacement Lid for GLH with LED (141013-A/AS/B/BS/C)

Replacement lid for use with GLH Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLH without LED (141012)

Replacement lid for use with GLH Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLH-SS with LED (145013-A/B/C)

Replacement lid for use with GLH-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLH-SS without LED (145012)

Replacement lid for use with GLH-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLM with LED (143010-A/B/C)

Replacement lid for use with GLM Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLM with LED (148010-A/B/C)

Replacement lid for use with GLM-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLM without LED (143009)

Replacement lid for use with GLM Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLM-SS without LED (148009)

Replacement lid for use with GLM-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLS with LED (142027-A/AS/B/BS/C)

Replacement lid for use with GLS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLS without LED (142026)

Replacement lid for use with GLS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLS-SS with LED (144041-A/AS/B/C)

Replacement lid for use with GLS-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Replacement Lid for GLS-SS without LED (144040)

Replacement lid for use with GLS-SS Safety Rope Pull Switches.
  • Includes the full lid assembly
  • 4 x security screws included
 

Rope Kits (Rope Kit ***M Length in Galvanised / Stainless Steel)

An extensive range of accessories are available from IDEM that assist with the installation of the full range of Guardian Line Safety Rope Pull Safety Switches.

ROPE KITS: Rope Kits come complete with Rope (choice of various lengths from 5m up to 126m), Eyebolts (amount depend upon length of rope chosen), IDEM’s patented Tensioner/Gripper and a 4mm Allen Key.

Rope Only (Rope Only ***M Length)

An extensive range of accessories are available from IDEM that assist with the installation of the full range of Guardian Line Safety Rope Pull Safety Switches.

ROPE: IDEM pull cable, 4mm diameter, galvanized steel, plastic coating, red.

Rope Pulleys (140021 / 140064)

Available in Stainless Steel or Galvanised. 77mm long, 40mm high with 20mm Fixing Hole centres.

Rope Tensioner/Gripper (140019 / 140020)

IDEM’s patented Tensioner/Gripper significantly reduces installation time by offering an eyehook and tensioner thimble and high strength gripper in one assembly that enables rapid connection to the Rope Switch eyebolts. Available in Stainless Steel or Galvanised.

Stainless Steel Safety Spring (140043)

220mm long the Safety Spring provides a means of connection to enable using just one Rope Switch.

T20 Torx Anti-Tamper Screwdriver

IDEM Rope Switches are anti-tamper, the T20 screwdriver allows engineers access to the Rope Switches.