Product range approvals:
Safety Rope Pull Cord Switches for Explosive Environments (Die Cast)
In electrical and safety engineering, hazardous locations are places where fire or explosion hazards may exist. Sources of such hazards include gases, vapours, dust and fibres which are combustible or flammable.
IDEM’s range of Safety Rope Switches have been developed to operate in explosive environments. The internal contact block has been third party approved by IECEx to the latest ATEX standards.
On pulling the rope, the safety contacts are positively opened, and the auxiliary contacts are closed. The safety rope switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button as required by ISO 13850.
All IDEM safety rope pull switches conform to ISO 13850 and IEC 60947-5-5 and have a positive mechanical linkage between the switch contacts and the wire rope. The rope pull switches have wire breakage monitoring.
Product range features:
- Material: Die-Cast Metal, Painted Yellow
- Ingress Protection: IP67
- Operating Temperature: -20C to 60C
Guardian Line Explosion Proof Rope Pull Safety Switch (GLHL-EX)
- Body Material: Die-Cast Metal; Painted Yellow
- Ingress Protection: IP67
- Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
- Cable Length (1 Switch): 100m left
- Cable Length (2 Switches): 125m left
- Zones: 1, 21, 2, 22
- Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db
Guardian Line Explosion Proof Rope Pull Safety Switch (GLHR-EX)
The GLHR-EX heavy duty safety rope pull switch has been designed to protect long conveyor lengths, where protection is required up to 125m (using 2 switches) or up to 100m (using 1 switch). The GLHR-EX can be used on its own or in combination with the GLHR-EX to connect up to 125m rope span from the right side.
- Body Material: Die-Cast Metal; Painted Yellow
- Ingress Protection: IP67
- Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
- Cable Length (1 Switch): 100m Right
- Cable Length (2 Switches): 125m Right
- Zones: 1, 21, 2, 22
- Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db
NOTE: Comes with 3m of pre-wired cable (longer available on request).
Guardian Line Explosion Proof Rope Pull Safety Switch (GLS-EX)
The GLS-EX standard duty safety rope pull switch has been designed to protect medium to long conveyor lengths, where protection is required up to 100m (using 2 switches) or up to 80m (using 1 switch).
- Body Material: Die-Cast Metal; Painted Yellow
- Ingress Protection: IP67
- Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
- Cable Length (1 Switch): 80m
- Cable Length (2 Switches): 100m
- Zones: 1, 21, 2, 22
- Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db
NOTE: Comes with 3m of pre-wired cable (longer available on request).
Guardian Line Explosion Proof Rope Pull Safety Switch with Dual Head (GLHD-EX)
The GLHD-EX heavy duty safety rope pull switch has been designed to protect long conveyor lengths. The dual head is capable of protecting up to 250m and shorter rope spans up to 200m can be achieved using a single switch. This makes for a cost-effective solution, as it reduces electrical wiring runs and the total number of switches required.
- Body Material: Die-Cast Metal; Painted Yellow
- Ingress Protection: IP67
- Contacts: 2-Pole or 4-Pole Ex Rated Contact Blocks
- Cable Length (1 Switch): 100m left / 100m right
- Cable Length (3 Switches): 125m left / 125m right
- Zones: 1, 21, 2, 22
- Ex Marking: Exd IIC T6 (-20 ≤ Ta ≤ +60C) Gb / Ex tb IIIC T85C (-20 ≤ Ta ≤ +60C) Db
NOTE: Comes with 3m of pre-wired cable (longer available on request).
